Using portal milling machine notes

Gantry milling machine is mainly based on gantry, the combination of various components to ensure that the mill to play its due role. Therefore, several points need to be noted when operating the portal milling machine to ensure the safety of personnel and equipment.

   1. When working early, objects must be fixed with screws or other special tools. When using an ordinary wrench, do not sleeve it on the outside, otherwise the wrench may fall and it may cause harm to people.

2. The cutter of the milling machine must be fixed. If there is a loose phenomenon, start the operation.

    3, before the milling machine running, we must first carefully check the operation of the transmission parts, but also the installation of the machine's baffle, before they can officially start work.

4. When using the machine to mill various workpieces, especially when roughing, it is necessary to slowly cut the workpiece at the time of starting.

5, to change the table and the position of the knife holder, first of all to play a fixed role to release the screw.

6, in the process of loading and unloading tools, you can use the copper hammer or mallet gently hit the fight, to avoid flying debris out of the blade to cause harm to people.

7. When using the milling machine to cut, the speed can not be changed at will, the hand and the tool must keep a certain distance, and the workpiece cannot be measured during this process.